I figure there should always be a quick reference thread for Humility-based interactions in case your head is hurting. Plus, it'll give us a chance to discuss the best way to explain it to people.
But for now, I have a question of my own. How exactly do Humility and Mishra's Factory interact now, and what's the best way to explain this to someone?
Thanks.
when the factory is animated, there will be two different effects trying to set it's ower and toughness, so they will be applied in timestamp order. If humility is in already in play, and you animate your factory, you will have a 2/2 worker, if the factory already is animated, then humility enters play, it will become a 1/1. In both cases, it won't have any abilities, and when the turn ends, it will become an unanimated mishra again, so activating it will turn it into a 2/2, since it's a new effect setting its p/t
418.5a The values of an object’s characteristics are determined by starting with the actual object, then applying continuous effects in a series of layers in the following order: (1) copy effects (see rule 503, “Copying Objects”); (2) control-changing effects; (3) text-changing effects; (4) type-, subtype-, and supertype-changing effects; (5) all other continuous effects, except those that change power and/or toughness; and (6) power- and/or toughness-changing effects.
Inside each layer from 1 through 5, apply effects from characteristic-setting abilities first, then all other effects. Inside layer 6, apply effects in a series of sublayers in the following order: (6a) effects from characteristic-setting abilities; (6b) all other effects not specifically applied in 6c, 6d, or 6e; (6c) changes from counters; (6d) effects from static abilities that modify power and/or toughness but don’t set power and/or toughness to a specific number or value; and (6e) effects that switch a creature’s power and toughness. See also the rules for timestamp order and dependency (rules 418.5b–418.5g).
This how it works with Humility and Factory:
Both Humility and Factory's power/toughness setting abilities would take place in layer 6b so they are applied in time stamp order. So whichever one happened most recently (humility coming into play or activating the factory would take precedence). So normally a factory would be a 2/2 that can't tap for mana or pump when a humility is in play and you turned it into a creature. The only time it would be a 1/1 is if humility came into play after factory was a creature and only for the duration of that turn, future activations would make it a 2/2.
Also some other notes on Humility:
Since counters are applied in Layer 6c and Humility's applies in layer 6b, the counters would not be overwritten by a humility. So for instance say you have a 2/2 creature with 3 +1/+1 counters, it would be a 4/4 under humility. Note that this is always true whether or not the counters where on it before humility came into play.
Pump effects such as giant growth and effects such as rancor are applied in layer 6d. So like the counters they will never get overridden by a humility.
Also something to note about the layers not related to Humility is that since power and toughness switching effects are applied as the last thing in layer 6e, effects that alter a creatures power would alter toughness and vice versa. For example an aquameba with switched power and toughness as a 3/1. If you were to give it -0/-1 it would become a 2/1 since switching is applied after the -0/-1.
Originally Posted by Parcher
Okay. That's pretty much what I thought. The discussion I had the previous night wasn't so much whether it was 1/1 or 2/2, but whether or not it had its ability when it turned into a creature. I -knew- it didn't, but I was doing a very bad job of trying to explain why. He kept saying "It became a creature after Humility was in play so it has the ability" and the best argument I could come up with is "No, you're stupid." Both clauses in my amazingly eloquent three word response were completely valid and correct points, but didn't help explain anything. (Possibly because I'd gotten up at 6:30 in the morning to drive an hour and fifteen minutes to deal blackjack for five hours.)
Yes the reason why Factory loses its abilities is because Humility says "All creatures lose all abilities". Time stamps are irrelevant to this. Now maybe if Factory said that it gains abilities when you turn it into a creature then timestamps would matter, but it doesn't.Originally Posted by Tacosnape
Originally Posted by Parcher
This is true. For example, a Nantuko Monastery will have first strike if you activate it after Humility enters play. This is because Humility's "all creatures lose all abilities" text and Monastery's "Monastery becomes a creature with first strike" text both apply in layer 5, and thus timestamp is applied.Originally Posted by quicksilver
Factory's difference is that its pumping ability isn't granted by its animation ability; it's an ability written on the card that Humility can remove as normal.
The main reason this all works differently than it used to is that text-changing abilities used to force every aspect of an ability to apply in layer 4. So, a manland animation, which changes the cards type from land to land creature, would apply fully (including power/toughness setting and ability granting) in time for Humility to strip it all away in layers 5 and 6.
John Carter explains the changes to the layering system very well here (the 2nd question).
If my opponent has a Humility in play, it says that "all creatures lose all abilities and are 1/1's". But what if I have a Phyrexian Totem in play and activate it turning it into a 5/5, can it somehow get around Humility's effect? My logic is that maybe it could because it was never a creature in the first place. I'm also wondering if the same applies for manlands. Any help would be great. Thanx.
When P. Totem is activated it becomes a creature, loses all abilities, and becomes a 5/5. Simple.
Last edited by xsockmonkeyx; 02-15-2007 at 03:45 AM. Reason: 5/5 not 1/1, my bad
info.ninja
You're wrong, the Totem is effected by timestamp. When activated like manlands it'll be a 5/5.
Will you get the crap about "Time Stamp" out of your head!!!
(That goes for everybody, not just Bryant!!!)
Humility works now because of layers. Yes, like the manlands, the totem will have power and toughness equal to whatever animated stats are printed on the card, but won't have any abilities.
Old Fogey
You're not just wrong, rules say you're a dick!
Did the mods merge my thread or something? I remember having an independent thread. Oh well, it doesn't matter anyways. Thanx for the quick responses guys. I kinda had a hunch that Totems worked under Humility but wasn't sure. Thanx for the feedback.
It is necessary to understand time stamps in order to understand how Humility interacts with other continuous effects, such as those created by manlands and Totems.
If you activate a Phyrexian Totem, and play a Humility afterwards, the Totem will shrink to a 1/1 and lose its abilities. Obviously this won't happen often, but it seems relevant nonetheless.
I'm fairly certain you are incorrect. For reference (copied from the Comp Rules again, although nothing was changed since my post above):Humility works now because of layers. Yes, like the manlands, the totem will have power and toughness equal to whatever animated stats are printed on the card, but won't have any abilities.
Here is the Oracle text of Phyrexian Totem:Originally Posted by The Comp Rules
When you activate the Totem's second ability, it creates a continuous effect with three parts, each of which apply in a different layer:3
Artifact
T: Add B to your mana pool.
2B: Phyrexian Totem becomes a 5/5 black Horror artifact creature with trample until end of turn.
Whenever Phyrexian Totem is dealt damage, if it's a creature, sacrifice that many permanents.
1) Totem becomes a Horror artifact creature until end of turn. This applies in layer 4.
3) Totem is black and has trample until end of turn. This applies in layer 5.
2) Totem becomes a 5/5 until end of turn. This applies in (sub)layer 6b.
The Oracle text of Humility:
Humility creates a continuous effect with two parts:2WW
Enchantment
All creatures lose all abilities and are 1/1.
1) All creatures lose all abilities. This applies in layer 5.
2) All creatures are 1/1. This applies in (sub)layer 6b.
Obviously, there is no conflict with Totem becoming a Horror artifact creature. Humility has no control over types.
However, there is a conflict in layer 5. Totem's ability wants Totem to be black and to have trample. Humility doesn't care what color Totem is, but it doesn't want it to have trample. Since all of this is going on in layer 5, we have to look at timestamp to figure out which effect wins out. Assuming Humility is already in play when the Totem's ability resolves, the Totem's ability will have the later timestamp, and thus will overrule Humility's effect.
So, the Totem will be black and will have trample.
In (sub)layer 6b, there will be another conflict. Humility wants the Totem to be 1/1, but the effect created by the Totem's ability wants it to be 5/5. Again, timestamp order is applied, and the Totem will become a 5/5.
The interesting thing about Phryrexian Totem is that its other ability, the sacrifice trigger, is "built-in" to the card. It isn't granted by any continuous effect, so Humility will remove it as soon as the Totem becomes a creature. This is similar to why an animated Factory loses its pumping ability under Humility.
In other words, Phyrexian Totem becomes strictly better under Humility. It loses nothing but the drawback.
Hey, i was just wondering how does humility work with phantom nishoba?
Thanks in advance
You end up with a 1/1 with 7 +1/+1 counters on it making it a 8/8.
The Life gain and damage replacement abilities are removed by Humility and are ignored.
hey, i was playin some mtg today and i ran into some more problems with this card! If humility is in play and my opponent plays a morphed exalted angel does it still have the ability to morph up? and if so is it a 1/1 or a 4/5?
Also, if i have humility in play and my opponent plays a Tarmogoyf, is it a 1/1 or stronger?
Thanks
Re: Morphed Angel. 1/1 no unmorph ability (I think), no life gain. Morph is a static ability, but an ability nonetheless. If I'm wrong please let me know.
Re: Tarmogoyf. Normally, I'd think it was a 1/1, but maybe something about the 'characteristic defining ability' (e.g. Sutured Ghoul in Breakfast) of the card gets around Humility at some layer where the CDA is set. I'd like to know the answer for this one, but I'm guessing it won't be a 1/1. Anyone know the answer?
This question came up in two German speaking forums, and I would like to know how the American experts handle this problem.
How does Magus of the Moon work with Humility in play?
Explanation a)
Magus of the Moon's effect applies in Layer 4, Humility in Layer 5. Therefore, Magus will turn all non-basic lands into Mountains, while he himself becomes a 1/1 without any abilities.
Explanation b)
Before applying layers, we have to see which effects are active in the first place.
Permanents --> effects
Magus of the Moon --> (effect) makes mountains
Humility --> (effect) removes abilities from creatures --> Magus's effect is gone!
So only Humility's effect remains, the result is that all non-basic lands remain the same, while Magus is a 1/1 without abilities.
What would you say, which version is correct? Or is there a completely different explanation?
"My sky is darker than thine!"
SENTENCED - 1993
Explanation a) is absolutely correct.
The game goes through the layers and when it arrives in layer4 Magus still has its abiility and all nonbasics are mountains. In layer 5 Humility removes the ability of Magus, but it has already done its dirty job.
@Sanguine Voyeur: I don't want to be rude, but this thread is not the right place for "believing".
There are currently 1 users browsing this thread. (0 members and 1 guests)